 |
Directory:
|
Contacts:
|
Useful Links:
|
Need more Information?Fill out our
|
 |
Heater MonitorThe Heater Monitor module is designed to actively test circuit breaker heaters and associated power supplies to ensure proper operation. It is mounted in the auxiliary module enclosure. The Heater Monitor module tests heaters by turning them on for 5 seconds at intervals set by the user. It may also be used for controlling the heaters, turning them on if the temperature drops below a point defined by the user. Motor MonitorThe Motor Monitor module is designed to provide ongoing data regarding the health of spring charging motors, air compressors or hydraulic pumps associated with the breaker. The Motor Monitor module provides an operational check on the energy accumulation and detailed information about motor behavior. The user can detect deterioration in the health of the system over time if the motor's runtime per breaker operation changes dramatically. Operation Current MonitorThe Operation Current Monitor module is designed to measure current interruption and the operating time required for the breaker to calculate I2T information. This module employs the OPTimizerä by INCONÒ to provide real-time operation and wear information. Pneumatic/Hydraulic Pressure MonitorThe Pneumatic/Hydraulic Pressure Monitor (PHPM) module is designed to continuously monitor the air and hydraulic pressure required to trip or close the operating mechanism of the circuit breaker. It measures a drop in pressure and the recharge time for the compressor or pump for each operation and provides trending information on performance. Trip/Close Coil MonitorThe Trip/Close Coil Module monitors the readiness of circuit breaker trip and close coils by continuously monitoring the coil’s electrical flow. The module has the ability to monitor as many as four coil circuits simultaneously.
|
